UVC air disinfection enables a wide spectrum of very efficient measures. You can considerably reduce the number of micro-organisms in air ducts and air conditioning chambers for air supply and circulation with integrated modules, such as KMD 40. The built-in modules on vaporizers ensure disinfected surfaces of cooling systems, combined with the disinfection of space. Regardless of air conditioning, recirculating units with their own fans help to constantly reduce micro-organisms in production plants, warehouses, and rooms for ripening long-life products, at the temperatures of 0 to 40 degrees.

Ceiling and wall units achieve the disinfection effect using the air convection in the rooms. Which concept, when and where, makes the most sense? We will be glad to explain it to you

UVpro KM module

UVpro KM module enables a simple installation of UVC technology in air ducts.

The inox housing of rectangular cross-section with connections for two UVC pipes can be easily installed on the floor or the ceiling of an air duct by means of two fixing plates. Different lengths and kinds of pipes allow a maximum flexibility and adjustment even in unfavourable operating conditions.

  • za izravnu ugradnju u ventilacijske i klimatizacijske kanale
  • For direct installation into ventilation and air conditioning ducts
  • Modular building and simple addition of extra equipment
  • Also suitable for large flows
  • Application temperatures from 10 to 50 degrees Celsius

UVpro FMD modular emitters with a flange

UVpro FMD series enables the installation of UVpro tube on the external part of the coating of ventilation and air conditioning ducts. A flange with three holes is installed on the external part of the wall of an air conditioning duct or a water tank in the area of application, and the UVC tube is passed through a bore 27 mm in diameter.

The inner working part of the UVC tube therefore has no mechanical assemblies. The maintenance is also performed externally. Alternatively, UVpro FMD can also be used as a double emitter in water disinfection. Ballast electronics is suffused in a quadrat inox pipe and it corresponds to the waterproof protection factor IP68. The two fixing plates enable a simple installation with two screws.

  • Quick and simple installation in existing air ducts
  • Suitable for moist rooms, protects from spattering (IP68)
  • With a UVpro thermo-tube, it is efficient even at low temperatures
  • All the parts are made of stainless steel

UVpro LKE set for cooling units

UVpro LKE sets are pre-assembled devices for disinfection and quick installation into industrial air cooling units. The system comes in a set of two UVpro tubes, one electronic ballast, and a system support made of stainless steel.

By positioning the UVC unit in front of the registers for air cooling, their surfaces remain disinfected, and with no bio-film. The condensed water flows away, and the cooling result remains. The stipulated intervals for maintenance of air cooling units are reduced to one visual survey, and the usual cleaning intervals are considerably extended. According to one’s wish, LKE can be monitored by CU1 modules or UVCline control electronics, and integrated into the monitoring equipment of the object.

  • Suitable for all hygiene air coolers
  • Installation by two screws directly into the air cooling unit
  • Application temperatures from 10 to 50 degrees Celsius
  • A possible surveillance function by UV PRO CU1 or UVCline
  • Teflon protection against glass breakage in accordance with HACCP and IFS standards

UVpro LKV – hygiene surfaces in the vaporizer

The LKV is installed in the suction area of the air cooling unit and it evenly illuminates the cooling ribs of the unit. The formation of bio-film on the cooling ribs has been prevented, and the condensed water can freely flow. 

The air cooling capacity has been considerably increased, and the cleaning intervals have been extended. The LKV fights cultures of micro-organisms in places where they usually multiply unhindered, which breaks the cycle of re-colonization. A large number of transits through the cooling unit provides an additional disinfection effect.

  • For air cooling units, vaporizers, and air-cooled chillers
  • Has a prevention effect in areas of maximum risk
  • A considerable reduction of the required maintenance interval, being flexibly adjustable to the standard one
  • Air cooler
  • Safety protection against „blic“ effect during installations at lower positions

Uv pro V500 – Industrial unit for recirculating air disinfection

The device suitable for moist rooms disinfects up to 500 m³ of air per hour, with an average dose of around 16 MJ/ cm². Its hygiene design with no external cables and construction elements prevents a colonization by micro-organisms.

UVpro V500 can be quickly and easily dismantled without any tools, for cleaning and maintenance purposes. Thanks to special thermo-tubes we guarantee a maximum UVC efficiency, even at below-zero temperatures.

  • For production areas, ripening facilities, warehouses and cold stores
  • Applicable for temperatures ranging from -10 to +50 degrees Celsius
  • A very high UVC dose per cycle thanks to optimized recirculating technology
  • Incapacitates even very resistant mould spores
  • Two levels of ventilation for different air qualities
  • Equipped, if desired, with a non-corrosive reflector

UVpro WDS versatile wall emitter

UVpro emitters of the WDS series are used in laboratories, doctor’s offices, and production areas as disinfection units which can be installed on the ceiling or on the wall.

The reflector which can be rotated by 360 degrees in stages of 22.5 degrees enables a selection of various purposes. Therefore, for instance, the air can be disinfected in the room above the personnel during the day, and at night, a targeted disinfection of work surfaces can be performed with reversed reflectors. UVpro WDS can be installed on the ceiling or put in the middle of a room or a laboratory. The unit is made of stainless steel and aluminium, and it is available in two lengths for different applications and room sizes.

  • It can be used as a ceiling, wall, or pendent emitter
  • The reflector can be rotated by 360 degrees
  • WDS is available in two lengths

UVpro WDO open UVC emitter

UVpro emitters of the WDO series are used in laboratories, doctor’s offices, and production areas as disinfection units, installed on the ceiling or on the wall.

This open emitter is used only in rooms without people and outside working hours. By radiation at the angle of 270 degrees, surfaces and air in the room are treated directly. UVpro WDO can be installed on the ceiling or put in the middle of a room or a laboratory. The unit is made of stainless steel and aluminium, and it is available in two lengths. An installation combined with a presence detector or a door switch is recommended.

  • It can be used as a ceiling, wall, or pendent emitter
  • Action at an open angle of 270 degrees
  • Available with ( N ) or thermo ( K ) type of tube
  • WDO is available in two lengths

UVpro ION 300S Ozonski generator za dezinfekciju, sterilizaciju i oplemenjivanje prostora

The ION 300S is a disinfection system, and odor remover for professional use. It is highly effective in air, smoke, and odor removal and in nicotine, moisture, animal, and mildew odor removal. Ozone (O3, radicalized oxygen) and ions that are produced by high-voltage, oxidize and split organic substances. Ozone not only eliminates odors but deactivates bacteria, viruses, and spores. The ION 300S is used for professional odor removal in cleaning and hygiene management, used car restoration and for handling in structural and water damage. The applications include industries such as hotels, restaurants, car detailing, nursing homes and care centers, as well as fire and water damage restoration.

  • Oxidation without chemical additives and residues
  • Portable device for mobile use
  • Deodorizing and antiseptic
  • Stainless steel housing and high-quality workmanship

DEL Platinum Modified Atmosphere Systems

DEL Platinum Modified Atmosphere Systems ensure a controlled dose of gas ozone for anti-microbe fumigation in cold stores and objects with controlled atmosphere. 

The systems are low-profiled and wall-installed, suitable for any room or tank size. All the systems use highly efficient UV ozone gas absorbers with monitored precision ( NIST monitored calibration ), with an automated controlled ozone dose. The characteristics of the device include the Human-Machine Interface ( HMI ), a fully automated control touch-screen, remote monitoring and control of the system functionality, data recording, as well as system diagnostics.